Lamp Indications And Memory Card Video Recorder Status - Panasonic AG-RCP30P Operating Instructions Manual

Lamp Indications and Memory Card Video Recorder Status

This table shows the relationship between lamp Lit/Unlit/blinking states and the
Memory Card Video Recorder's operating status.
: Lit : Normal blinking
: Blinking consisting of short off intervals combined with long on intervals
Indicator Lamp
REC READY
(Red) (Green)
∗1 When there is little space left on a P2 card (about 30 minutes or less) or more
than 1900 recording files (up to 2000 files) have been recorded, the [REC]
lamp will blink continuously.
∗2 If the error is related to the status of the P2 card, the error details will appear
in the status display of the On-Screen Display. See page 21, "Viewing Memory
Card Video Recorder status".
Notes:
• If pressing the [REC] button or entering a recording trigger fails to start
recording, the [REC] lamp blinks at a high rate.
• The [BUSY] lamp blinks when accessing the P2 card immediately after
opening or closing the Memory Card Video Recorder's P2 card slot cover.
52
: Unlit
BUSY
(Red)
Status immediately after power-on
Memory Card Video Recorder booting
Live video display
Normal recording
Intermittent recording
• Postrecording
• When uploading or exporting a PC application
Administrator setting screen display with
recording stopped (not accessing P2 card)
Administrator setting screen display with
recording stopped (accessing P2 card)
Playing
• Terminating operation
• P2 card start processing (recognition when
inserted)
• P2 card shutdown processing (when a P2
card slot cover is opened)
Updating Memory Card Video Recorder
firmware
Updating microprocessors on the Memory
Card Video Recorder and this unit
An error involving recording operations
, , or
occurred during live screen display.
• The recorder's P2 card slot cover is open
• No P2 card is inserted, or it is not recognized
• No more P2 card space available
• The write-protect switch of the P2 card is set
to "PROTECT"
: Fast blinking (about three times/sec)
Memory Card Video Recorder Status
∗
1
∗
1
∗
2