Receive Mode Settings; Ring Delay; F/T Ring Time (Fax/Tel Mode Only) - Brother MFC-790CW User Manual

Chapter 6

Receive mode settings

Ring Delay

If toll saver is On, then the ring delay setting
has no effect. See Setting toll saver
on pages 81.
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display Ring Delay.
g
Press Ring Delay.
h
Press Ring Delay again.
i
Press the number of times the machine
will ring before it answers (2-10 for
Australia, 1-10 for New Zealand, 0-10
for some countries).
If you choose 0, the line will not ring at
all.
j
Press Stop/Exit.
46
F/T Ring Time
6
(Fax/Tel mode only)
When somebody calls your machine, you and
6
your caller will hear the normal telephone ring
sound. The number of rings is set by the ring
delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T Ring (a fast
double-ring) for the time you have set in the
F/T Ring time setting. If you hear the F/T Ring
it means that you have a voice caller on the
line.
Because the F/T Ring is made by the
machine, extension and external telephones
will not ring; however, you can still answer the
call on any telephone. (For more information
see Using remote codes on page 68.)
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display
F/T Ring Time.
g
Press F/T Ring Time.
h
Press how long the machine will ring to
alert you that you have a voice call (20,
30, 40 or 70 seconds for Australia and
some countries, 20, 30, 40 or
55 seconds for New Zealand).
i
Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.
6