Fax/Tel Ogm (Announcement); Activating Tad Mode - Brother MFC-790CW User Manual

Listening to your OGM
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display Setup TAD.
e
Press Setup TAD.
f
Press OGM.
g
Press TAD Message or F/T Message.
h
Press Playing OGM.
Adjust the volume by pressing d or c.
i
Press Stop/Exit.
Erasing your OGM
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display Setup TAD.
e
Press Setup TAD.
f
Press OGM.
g
Press TAD Message or F/T Message.
h
Press Erase MSG.
i
Do one of the following:
Press Yes to erase the OGM.
Press No to exit without erasing.
j
Press Stop/Exit.
Fax/Tel OGM
9
(Announcement)
If your machine is set to Fax/Tel receive
mode this message will be played by your
Brother machine to a caller. Unlike the TAD
OGM, the caller will not be able to leave a
message.
To record your Fax/Tel OGM follow the
instructions on Outgoing message (OGM)
on page 78.
If you need to review the steps for setting up
the Fax/Tel receive mode, see Receive
modes on page 43.

Activating TAD mode

When the light glows, TAD mode is
9
active. Press
Digital TAD
to enter TAD mode.
9
9
9
79