Fax Detect - Brother MFC-790CW User Manual

Fax Detect

If Fax Detect is On:
Fax Detect is turned On as default.
The machine receives a fax call
automatically, even if you answer the call.
When you see Receiving on the LCD or
when you hear "chirps" through the handset
you are using, just replace the handset. Your
machine will do the rest.
If Fax Detect is Semi:
The machine will only receive a fax call
automatically if you answered it using the
machine's handset, cordless handset or
Speaker Phone. If you answered at an
extension telephone, press l 5 1 (l 9 1 for
New Zealand). (See Operation from
extension telephones on page 68.)
If Fax Detect is Off:
If you are at the machine and answer a fax
call by lifting the handset, press Mono Start
or Colour Start, then press Receive to
receive the fax.
If you answered at an extension telephone,
press l 5 1 (l 9 1 for New Zealand). (See
Operation from extension telephones
on page 68.)
Note
• If this feature is set to On, but your
machine does not connect a fax call when
you lift an extension or external telephone
handset, press the remote activation code
l 5 1 (l 9 1 for New Zealand).
• If you send faxes from a computer on the
same telephone line and the machine
intercepts them, set Fax Detect to Off.
• (MFC-990CW) If you typically carry the
cordless handset away from the machine,
we recommend that you turn on Fax
Detect. If Fax Detect is turned off and you
answer a fax call, you will have to go to the
machine and press Mono Start or
Colour Start.
a
Press MENU.
6
b
Press a or b to display Fax.
c
Press Fax.
6
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display Fax Detect.
g
Press Fax Detect.
6
h
Press On, Semi (or Off).
i
Press Stop/Exit.
6
Receiving a Fax
47
6