Replacement Procedures
4.7
HDD (SECOND HDD)
Removing second HDD-H9.5mm / HDD-H12.5mm
The following describes the procedure for removing the second HDD (See Figure 4-7-1 to 4-
7-3).
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
data loss or damage to the device.
1. Turn the computer upside down.
2. Remove the following screws securing a HDD slot cover and remove a HDD slot
cover.
M2.54.0B
3. Remove the following screws securing the HDD assembly.
M2.53.0B
4. Disconnect the HDD assembly from the connector on the system board.
Qosmio X500 Maintenance Manual (960-Q08)
FLAT BIND screw
FLAT BIND screw
Figure 4-7-1 Turn the computer upside down
x2
x2
4-21