Procedure 4 Diagnostic Test Program Execution Check - Toshiba Qosmio X500 Maintenance Manual

2 Troubleshooting Procedures
Procedure 4 Diagnostic Test Program Execution Check
The HDD test program is stored in the Diagnostics Disk. Perform all of the HDD tests in the
Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information about
the HDD test program.
If an error is detected during the HDD test, an error code and status will be displayed. The
error codes and statuses are described in Table 2-8. If an error code is not displayed but the
problem still occurs, go to Procedure 5.
Table 2-5-1 2.5" Hard disk drive error code and status
22
Qosmio X500 Maintenance Manual (960-Q08)