Replacement Procedures
4.14 Top Cover assembly
Removing the Top cover assembly
The following describes the procedure for removing the top cover assembly (See Figure 4-
14-1 to 4-14-3).
1. Turn over the computer.
2. Remove the following screws securing the top cover assembly from the back and
bottom of computer.
M2.52.0
M2.56.5
M2.58.0
M2.54.0
M2.53.0
Qosmio X500 Maintenance Manual (960-Q08)
FLAT BIND screw Back
FLAT BIND screw Back
FLAT BIND screw Back
FLAT BIND screw Back
FLAT BIND screw Back
Figure 4-14-1 Remove the screws (back)
x5
x11
x6
x2
x1
4-42