Siemens C2-010 User Manual page 26

C2-010 / C2-010-I ADSL2+ Router User's Guide
So, if you want to use an IP addressing scheme that is different from the 192.168.1.x/255.255.255.0
scheme, you will need to give the ADSL2+ Router ADSL router a new IP address. This is done on the LAN
Settings page, as shown below.
To access the LAN Settings menu, click the LAN button in the Home directory.
Figure 4-10. Configure LAN IP settings
To change the LAN IP Address or Subnet Mask, type in the desired values and click the Apply button.
The new IP settings must be saved and the ADSL2+ Router must be restarted for the settings to go into
effect. To manually Save & Restart the ADSL2+ Router, click on the Tools directory tab and then click the
System menu button. Then click the Save&Restart button. The ADSL2+ Router will save the new IP settings
and restart. Your web browser should automatically be redirected to the new IP address.
4-14