Table of Contents
Advertisement
ADSL2+ Router User's Guide
Filter
Settings
Src IP
Select Any IP, Single IP, or IP Range from the drop-down menu and then enter the
appropriate IP address or addresses that will be the source of packets this filter will act
Address
upon.
Select Any IP, Single IP, or IP Range from the drop-down menu and then enter the
Dest IP
Address
appropriate IP address or addresses that will be the destination of packets this filter will act
upon.
Source
Select Any Port, Single Port, Port Range, or Safe Range. A port or range of ports that will be
Port
used to connect to the Source IP address or addresses entered above. If Any Port is
entered, all ports in this IP range will be acted upon by this filter.
Dest Port
Select Any Port, Single Port, Port Range, or Safe Range. A port or range of ports that will be
used to connect to the Destination IP address or addresses entered above. If Any Port is
entered, all ports in this IP range will be acted upon by this filter.
Protocol
The protocol associated with this IP filter. The user may choose between TCP, UDP or
TCP;UDP.
Action
Select between Allow or Deny. Allow will instruct the filter to allow packets that meet the
criteria entered above to cross the router, while Deny will instruct the router to drop any
packets that meet the above criteria. It should be noted the Allow will create a much more
restrictive filter than the Deny setting.
Description
5-7
Hide quick links:
Advertisement
Table of Contents
