NEC Express5800/320Fd-LR User Manual page 107

IMPORTANT:
If you set RDR on the disk that
includes a system partition or a
partition that cannot be
unmounted, the message on the
right is displayed. Click [Yes].
The system is restarted after 2
minutes. After it is restarted,
perform the steps 7and later.
Insert the disk to set dual configuration into the slot 1 of PCI module 1, and execute
7.
the procedure 2.
IMPORTANT:
– If a HDD is already mounted, this procedure is not necessary. Proceed to the
procedure 8.
– A popup window may come up when you inserted or initialized the disk;
however, you do not need to restart the system. Select [No] to exit the popup
window.
– As to the disk to be inserted, use a new disk or a physically formatted disk with
the same capacity as the synchronization source disk. If you use other disks,
dual configuration is not set normally.
As for physical format, refer to "SAS BIOS – Adaptec SAS/SATA – Configuration
*
Utility" in Chapter 4, "System Configuration" in the separate volume of the User's
Guide, and perform Format Disk with Disk Utilities
To perform "Low-Level Format," on the BIOS setup utility, click [Server],
[Monitoring Configuration] and set [Option ROM Scan Monitoring] to [Disabled].
For how to configure the settings, see "System BIOS – SETUP –" in Chapter 4,
"System Configuration" in the separate volume of the User's Guide.
Windows Setup 4-43