NEC Express5800/320Fd-LR User Manual page 109

Check that disk synchronization has been started and the status of the DISK ACCESS LED
10.
and RDR Utility display changes as the following table.
During synchronization
Synchronization
source disk
Synchronization
destination disk
RDR Virtual Disk
IMPORTANT:
– The time required for synchronization deffers depending on the size
of the partition that exists on the disk. As for the partition with the
18GB capacity, it takes about 20 minutes. If there is no partition,
synchronization completes soon after setting RDR is completed and
the disk changes to the synchronization completion status.
– Setting dual disk configuration may not complete if the system is
rebooted during synchronization. Do not reboot the system before
synchronization process completes.
DISK ACCESS
LED
Amber and
blinking
Amber and
blinking
Windows Setup 4-45
RDR Utility
Condition
Simplex
Syncing
Resync x %
Simplex
(x=0, 4, 8,..., 96)
Status