Table of Contents
Advertisement
Watching TV
Plasma Display TV (Panel Unit)
INPUT
STANDBY/ON indicator
MAIN POWER
AVC System
STANDBY/ON indicator
POWER
Plasma Display TV (Panel Unit) status indicators
Off
Power off
Flashing red
AVC System does not turn on or its power cord is disconnected.
Red
The Plasma Display TV is in standby mode.
Green
The Plasma Display TV turns the power on.
AVC System status indicators
Power off
Off
Only the AVC System is in standby mode or the Plasma Display TV is in standby mode.
Red
The Plasma Display TV turns the power on.
Green
18
Turning on the power
1
Press MAIN POWER on the Plasma Display TV (Panel Unit).
• The STANDBY/ON indicator on the Plasma Display TV (Panel
CH
Unit) flashes red.
2
Press POWER on the AVC System.
• The System turns the power on.
• The STANDBY/ON indicator on the Plasma Display TV (Panel
Unit) lights up green and the one on the AVC System lights up
green.
• If the STANDBY/ON indicators still light up red, press B on
the remote control unit or the Plasma Display TV (Panel Unit)
to turn the System on.
When turning the AVC System on first
1
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights up red.
2
Press MAIN POWER on the Plasma Display TV (Panel Unit).
• The System turns the power on.
• The STANDBY/ON indicator on the Plasma Display TV (Panel
Unit) lights up green and the one on the AVC System lights up
green.
• If the STANDBY/ON indicators still light up red, press B on
the remote control unit or the Plasma Display TV (Panel Unit)
to turn the System on.
A
• "System" above means the Plasma Display TV (Panel Unit) and AVC
System.
• The initial auto installation starts when the System powers on for the first
time. If the System has been turned on before, the initial auto installation
will not be invoked. See page 28 to try auto installation from the Setup
menu.
Turning off the power
1
Press B on the remote control unit or the Plasma Display
TV (Panel Unit).
• The System enters standby mode and the image on the screen
disappears.
• Both STANDBY/ON indicators change from green to red.
2
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns off and
the one on the Plasma Display TV (Panel Unit) flashes red.
3
Press MAIN POWER on the Plasma Display TV (Panel Unit).
• The STANDBY/ON indicator on the Plasma Display TV (Panel
Unit) turns off after approximately 5 seconds.
A
• If you are not going to use this System for a long time, be sure to remove
the power cord from the power outlet.
Advertisement
Table of Contents
