Turning On The Power; Turning Off The Power - Sharp PZ-MR2X Operation Manual

Watching TV
Plasma Display
MAIN POWER
POWER INPUT
POWER
STANDBY/ON indicator
MAIN POWER
AVC System
STANDBY/ON indicator
POWER
Plasma Display status indicators
Off Power off
Flashing red AVC System does not turn on or its power cord is disconnected.
Red The Plasma Display TV is in standby mode.
Green The Plasma Display TV turns the power on.
AVC System status indicators
Power off
Off
Only the AVC System is in standby mode or the Plasma Display TV is in standby mode.
Red
The Plasma Display TV turns the power on.
Green
VOL CH

Turning on the power

1
Press MAIN POWER on the Plasma Display.
• The STANDBY/ON indicator on the Plasma Display
flashes red.
2
Press POWER on the AVC System.
• The System turns the power on.
• The STANDBY/ON indicator on the Plasma Display
lights up green and the one on the AVC System lights
up green.
• If the STANDBY/ON indicators still light up red, press
B B
B on the remote control unit or POWER on the Plasma B B
Display to turn the System on.
First time turning on the AVC System
1
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights
up red.
2
Press MAIN POWER on the Plasma Display.
• The System turns the power on.
• The STANDBY/ON indicator on the Plasma Display
lights up green and the one on the AVC System lights
up green.
• If the STANDBY/ON indicators still light up red, press
B B B on the remote control unit or POWER on the Plasma
B B
Display to turn the System on.
A
• In this manual, "System" means the Plasma Display and AVC
System.

Turning off the power

1
Press B B B B on the remote control unit or POWER on B
the Plasma Display.
• The System enters standby mode and the image on
the screen disappears.
• Both STANDBY/ON indicators change from green to
red.
2
Press POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns
off and the one on the Plasma Display flashes red.
3
Press MAIN POWER on the Plasma Display.
• The STANDBY/ON indicator on the Plasma Display
turns off after approximately 5 seconds.
A
• If you are not going to use this System for a long time, be sure to
remove the power cords from the power outlet.
E-18