Watching Broadcasts Via A Hdtv Tuner; Connecting A Hdtv Tuner; Displaying Broadcasts Via A Hdtv Tuner - Sharp PZ-MR2X Operation Manual

Using external equipment

Watching broadcasts via a HDTV tuner

Connecting a HDTV tuner

You can use the INPUT 3 terminal when connecting a HDTV tuner and other audiovisual equipment.
AVC System (rear view)
ANT
OUT ANT/CABLE 75Ω
E-49
COMPONENT
Y P P
B R
INPUT 3
MONITOR OUTPUT S-VIDEO VIDEO R-AUDIO-L S-VIDEO
AV cable
(commercially available)
S-video cable
(commercially available)
MENU
Option
Input Select
Input3
AUTO
AV-Y/C
COMPONENT
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
Component video cable
(commercially available)
COMPONENT
Y P P
B R
INPUT 1
RS-232C
DISPLAY OUTPUT-2
INPUT 2
VIDEO R-AUDIO-L

Displaying broadcasts via a HDTV tuner

When connecting to the INPUT 3 terminal, select
"INPUT3" and set the correct input signal type on "Input
Select" in the menu. (See page 54.)
[AUTO]
The setting is stored and can be selected on the
"INPUT SOURCE" menu.
To watch a HDTV tuner image, select "INPUT3" from
the "INPUT SOURCE" menu using b on the remote
control unit or INPUT on the Plasma Display. (See page
54.)
A
• Each time b is pressed, the input source toggles.
• If the HDTV tuner image does not come in clearly, you
may need to change the input signal type setting on the
"Input Select" menu.
When using component
video cable, select
DISPLAY OUTPUT-1
"COMPONENT" for
"Input Select" in the
menu.
AC INPUT
110V - 24OV
HDTV tuner