Useful Adjustment Settings; Image Position (Av Mode Only) - Sharp PZ-MR2X Operation Manual

Useful adjustment settings

MENU
Option
Position
H-Pos. [0]
V-Pos. [0]
Reset
RETURN
–15 +15
–30 +30

Image position (AV mode only)

For adjusting a picture's horizontal and vertical
position.
1
Press MENU.
2
Press a/b to select "Option", and then press
ENTER.
3
Press a/b to select "Position", and then press
ENTER.
4
Press a/b to select "H-Pos." or "V-Pos.".
5
Press c/d to adjust the item to your desired
position.
6
Press MENU to exit the menu.
A
• For resetting all adjustment items set to the factory preset
values,
1 Press a/b to select "Reset", and then press ENTER.
2 Press a/b to select "Yes", and then press ENTER.
• Return to the previous menu by pressing RETURN.
• Adjustments are stored separately according to input
source.
• You can easily move the image position as shown on page
26, but when the power is switched off the image will return
to the previously memorised position.
Selected item
Centres the image by moving it to the left or
H-Pos.
right.
Centres the image by moving it up or down.
V-Pos.
Description
E-52