Picture Adjustments - Sharp PZ-MR2X Operation Manual

Basic adjustment settings

Picture adjustments

Adjust the picture to your preference with the following picture settings.
Adjustments items for AV source
MENU
Picture
USER
Contrast
Bright
Colour
Tint
Sharp
Advanced
Reset
RETURN
Selected item
Contrast
For less contrast
Bright
For less brightness
For less colour
Colour
intensity
Skin tones become
Tint
purplish
Sharp
For less sharpness
A
• Select "Advanced" and then press ENTER to set
"Colour Temp", "Film mode", "Black", "Monochrome", or
"I/P Setting". See pages 40 to 42.
E-39
Currently selected AV
mode
[+30] 0 +40
[0] –30 +30
[0] –30 +30
[0] –30 +30
[0] –7 +7
d button
cbutton
For more contrast
For more brightness
For more colour
intensity
Skin tones become
greenish
For more sharpness
1
Press MENU.
2
Press a/b to select "Picture", and then press
ENTER.
• Picture menu displays.
3
Press a/b to select a specific adjustment item.
4
Press c/d to adjust the item to your desired
position.
5
Press MENU to exit the menu.
A
• When all adjustments set to factory preset values,
1 Press a/b to select "Reset", and then press ENTER.
2 Press a/b to select "Yes", and then press ENTER.
• Return to the previous menu by pressing RETURN.
• If you select "STANDARD" with AV MODE on the
remote control unit, these items will display in gray
and not be selectable. See page 55.
Adjustments items for PC source
MENU
Picture
USER
Contrast [+30] 0
Bright [0] –30
Red [0] –30
Green [0] –30
Blue [0] –30
Reset
RETURN
Selected item
cbutton
Contrast
For less contrast
Bright
For less brightness
Red
For weaker red
Green
For weaker green
Blue
For weaker blue
Currently selected AV
mode
+40
+30
+30
+30
+30
d
button
For more contrast
For more brightness
For stronger red
For stronger green
For stronger blue