The Size Of Clear Film Cannot Be Detected; Margins Are Wide; When Printing On Thin Roll Paper, The Printed Surface Becomes Scratched - Canon imagePROGRAF iPF9400S Basic Manual

iPF9400S
The Media Take-up Sensor cord is not connected to the Right Media Take-up
Unit correctly.

The size of clear film cannot be detected

The size of clear film cannot be detected
Cause
The Platen is soiled with ink or other substances.

Margins are wide

Margins are wide
Rolls are advanced a specific amount before cutting to prevent problems with cutting and paper ejection.

When printing on thin roll paper, the printed surface becomes scratched

When printing on thin roll paper, the printed surface becomes scratched
Cause
The roll paper has sagged during printing,
scratching the surface of the paper and causing
wrinkle creases in the paper.
Basic Guide
Cause
Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
Cause
Set Roll Tension to High in the Control Panel menu.
(See "Menu Settings.")
If you change the Roll Tension setting, We recommend that you perform Adj. Quali-
ty.
(See "Automatic Banding Adjustment.")
Remove the foreign object from the Media Take-up
Sensor path. Arrange the Basket Cloth and Basket Rod
so they do not interfere with the Media Take-up Sensor.
Reconnect the Media Take-up Sensor cord as follows.
1.
Turn the printer off.
2.
Disconnect the Media Take-up Sensor cord from the
Right Media Take-up Unit and reconnect it firmly, all
the way in.
3.
Turn the printer on.
(See "Using the Media Take-up Unit (Optional).")
→User's Guide
If the Media Take-up Unit continues rotating, contact
your Canon dealer for assistance.
Corrective Action
→P.53
Corrective Action
→User's Guide
→P.98
The size of clear film cannot be detected
Corrective Action
Corrective Action
This operation is normal.
107