Removing The Roll From The Printer - Canon imagePROGRAF iPF9400S Basic Manual

Basic guide
Hide thumbs Also See for imagePROGRAF iPF9400S:
Table of Contents

Advertisement

iPF9400S
10
Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and
the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.")
ManageRemain-
Barcodes
Roll
Off
Printed
Not printed
On
Printed
Not printed
Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Specifying the
Cutting Method for Rolls.")
Important
For details on types of paper to select, see the Paper Reference Guide. (See "Types of Paper.")
→User's Guide
Note
Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quality.
(See "Automatic Adjustment to Straighten Lines and Colors.")
When paper leading edge detection is set to Off for Manual, printing will start at the position at which the roll
was set in procedure 8. Thus, the margin of the paper leading edge will enlarge. (See "Specifying the Cutting
Method for Rolls.")

Removing the Roll from the Printer

Removing the Roll from the Printer
Remove rolls from the printer as follows.
If you need to cut the roll, see "Specifying the Cutting Method for Rolls."
Note
1
On the Tab Selection screen of the Control Panel, press ◀ or
▶ to select the Paper tab (
If the Tab Selection screen is not displayed, press the Menu button.
Note
2
Press the OK button.
The Paper Menu is displayed.
3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
Basic Guide
A menu for selection of the type of paper is shown on the Display Screen.
Press ▲ or ▼ to select the type of paper, and then press the OK button.
The type and amount of paper left is automatically detected based on the barcode printed on the roll.
There is no need to specify the type and length of the paper.
A menu for selection of the type and length of paper is shown on the Display Screen.
Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.
→User's Guide
→User's Guide
).
Printer Operation After the Paper is Fed
→P.95
→User's Guide
Removing the Roll from the Printer
→User's Guide
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf9400

Table of Contents