Cutter Unit - Canon imagePROGRAF iPF9400S Basic Manual

Cutter Unit

Cutter Unit
Cutter Unit
Cutter Unit ..................................................................................................................................................... 42
Replacing the Cutter Unit ............................................................................................................................. 42
Cutter Unit
Cutter Unit
When purchasing, check the Model number.
•
For instructions on Cutter Unit replacement, see "Replacing the Cutter Unit."
Note
Replacing the Cutter Unit
Replacing the Cutter Unit
Compatible Cutter Units
For information on compatible cutter units, see "Cutter Unit."
Access the menu for cutter unit replacement
1
On the Tab Selection screen of the Control Panel, press ◀ or
▶ to select the Settings/Adj. tab (
•
Note
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4
Press ▲ or ▼ to select Change Cutter, and then press the OK button.
The Carriage moves. When it finishes moving, instructions are displayed on the Display Screen.
•
Note
42
Shape
If the Tab Selection screen is not displayed, press the Menu button.
If you do not respond within two minutes, cutter cleaner replacement is canceled. In this case, repeat the pro-
cedure.
CT-06
→P.42
).
Model number
→P.42
iPF9400S
Basic Guide