Canon imagePROGRAF iPF9400S Basic Manual page 30

Replacing Ink Tanks
5
Make sure the Ink Lamp is lit in red.
•
Note
6
Close the Ink Tank Cover.
Important
Load the Ink Tank (700 ml)
1
Before opening the pouch, hold the new Ink Tank
with both hands and tilt it to the left and right as
shown, shaking gently it seven or eight times.
•
30
Caution
If the Ink Lamp is not lit in red, reload the tank.
•
After Ink Tank replacement, always close the Ink Tank Cover. If the Ink Tank Cover cannot close, some Ink
Tank Lock Lever may not be closed completely. Make sure all ink tank lock levers are fully closed.
700 ml ink tanks are heavy, so use your whole arm to agitate it instead of just your wrist. If you agitate it using
just your wrist, you may injure your wrist.
iPF9400S
Basic Guide