Loading Paper For Copying; Selecting A Paper Tray; Preparing A Document; Loading An Original Document - Dell 1125 Mono Laser MFP User Manual

Laser multi-function printer 1125

Table of Contents

Back to Contents Page

Copying

Dell™ Multi-Function Printer 1125

User's Guide

Loading Paper for Copying

Selecting a Paper Tray

Preparing a Document

Loading an Original Document

Making Copies

Setting Copy Options

Using Special Copy Features

Changing the Default Settings

Using Dell MFP Center

Loading Paper for Copying

The instructions for loading print media are the same whether you are printing, faxing, or copying. For more information, see

Tray

for loading paper in the paper tray and

Selecting a Paper Tray

The printer uses the main paper tray by default. If there is paper in the bypass tray, the printer automatically detects it and uses the bypass tray for the

operation.

Preparing a Document

You can use the scanner glass or the Automatic Document Feeder (ADF) to load an original document for copying, scanning, and sending a fax. Using the ADF,

you can load up to 30 sheets of 55 to 125 g/m2 (20 lb) documents for one job. Using the scanner glass, you can load one sheet at a time.

NOTE:

To get the best scan quality, especially for color or gray scale images, use the scanner glass instead of the ADF.

When you use the ADF:

The ADF only supports A4, Letter, and Legal size documents as indicated on the width guide.

Do not attempt to feed the following types of documents:

Carbon-paper or carbon-backed paper

Coated paper

Onion skin or thin paper

Wrinkled or creased paper

Curled or rolled paper

Torn paper

Remove all staples and paper clips before loading documents.

Ensure that any glue, ink, or correction fluid on the paper is completely dry before loading documents.

Do not load documents containing different sizes or weights of paper.

Do not load booklets, pamphlets, transparencies or documents having other unusual characteristics.

Loading an Original Document

You can use the ADF (Automatic Document Feeder) or the scanner glass to load an original document. Using the ADF, you can load up to 30 sheets of 55 to

125 g/m2 paper at a time. Using the scanner glass, you can load one sheet at a time.

NOTE:

ADF Output stacking performance may be affected if the ADF is loaded with media with a paper curl of more than 4.4 mm.

NOTE:

To scan a document from the scanner glass, ensure that no document is in the ADF. If any document is detected in the ADF, it has priority over

the document on the scanner glass.

NOTE:

To get the best scan quality, especially for color or gray scale images, use the scanner glass instead of the ADF.

Using the Bypass Tray

for loading paper in the bypass tray.

Loading Print Media in the Paper

Table of Contents