Making Copies; Setting Copy Options; Number Of Copies - Dell 1125 Mono Laser MFP User Manual

Laser multi-function printer 1125

Table of Contents

For detailed guidelines for preparing an original document, see

3. Close the scanner cover.

NOTE:

If you are copying a page from a book or magazine, lift the cover until its hinges are caught by the stopper and then close the cover. If the book

or magazine is thicker than 30 mm, copy with the cover open.

NOTE:

Leaving the cover open while copying may affect the copy quality and toner consumption.

Making Copies

NOTE:

A computer connection is not required for copying.

NOTE:

Contaminates in the ADF or on the scanner glass may cause black vertical lines or black spots on the printout. For best results, clean the ADF and

the scanner glass before use. See

1. Load the document(s) face up, with the top edge of the document first into the ADF.

Place a single document face down on the scanner glass.

For more information on loading a document, see

2. Customize the copy settings including the number of copies, Zoom, and contrast by selecting the copy menu and using the operator panel buttons. See

Setting Copy

Options.

To clear the settings, use the Cancel (V) button.

3. If necessary, you can use special copy features, such as Clone or ID copying. See

4. Press Start (u) to begin copying. The display shows the copy processing.

NOTE:

You can cancel the copy job at any time. Press Cancel (V) to stop copying.

Setting Copy Options

The Copy menus on the operator panel let you customize all the basic copy options; number of copies, Zoom, and contrast. Set the following options for the

current copy job before pressing Start (u) to make copies.

NOTE:

If you press Cancel (V) while you set the copy options, all of the options you have set for the current copy job may be cancelled and return to

their default status. Or, they automatically return to their default status after copying.