Sony SRX-T105 Installation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Projector
  5. SRX-T105
  6. Installation manual

Sony SRX-T105 Installation Manual

Installation guide (sxrd-install)
Hide thumbs Also See for SRX-T105:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
Data Projector
Installation Manual for Dealers
WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other
than that contained in the operating instructions unless you are qualified to do so.
Refer all servicing to qualified service personnel.
SRX-T110
SRX-T105
© 2008 Sony Corporation
4-115-586-11 (2)

Advertisement

Table of Contents
loading

Related Manuals for Sony SRX-T105

Summary of Contents for Sony SRX-T105

  • Page 1 To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel. SRX-T110 SRX-T105 © 2008 Sony Corporation...

  • Page 2: Table Of Contents

    Table of Contents Chapter 1 Overview Precautions ..................4 About the Optional Accessories ............ 5 Chapter 2 Installation and Connections About the Display Mode..............6 Projection Distance Charts............. 7 Before Installation ................. 11 About the Mounting Platform ............. 11 Positioning the Projector towards the Screen........11 Installing Lamp Houses ..............
  • Page 3 Board ....................25 Input Source ..................25 Signal Info (Information) ..............26 Signal Adjust ..................26 COLOR/FRAME Window ............... 27 Board ....................27 Color ....................27 Frame Adjust ..................28 INSTALLATION Window..............28 LENS CONTROL ................28 ELECTRIC V SHIFT FUNCTION............. 28 SIRCS ....................

  • Page 4: Chapter 1 Overview

    • Should any liquid or solid object fall into the cabinet, as color irregularity or a shorten lamp life. unplug the unit and have it checked by Sony dealer • Do not install the unit in a location near heat sources before operating it further.

  • Page 5: About The Optional Accessories

    Note When LKRA-001 is attached, be sure to use an external For purchase of the kit, contact your Sony dealer. fan with the specified air flow. If the projector does not exhaust enough heat, the projector becomes hot. This may cause damage to the parts in the projector.

  • Page 6: Chapter 2 Installation And Connections

    Installation and Connections Chapter When projecting a 2880-pixel (aspect ratio About the Display Mode 4:3) image at the maximum horizontal picture element Black bands are displayed on the right and left sides. The displayed image on the screen varies with the signal input as illustrated below.

  • Page 7: Projection Distance Charts

    Projection Distance Charts Screen A:Distance between the floor and the feet of the projector Center of lens Center of screen A = B – 320 mm (12 inches) B: Distance between the floor and the center of screen 320 mm (12 inches) The alphabetical characters in this section indicate the following measurements: W: Screen width (unit: mm)
  • Page 8 Using the LKRL-Z115 projection lens When projecting a 4096-pixel (4K × 2K) image at the maximum horizontal picture element Unit: mm (inches) 4500 5000 6000 7000 8000 9000 10000 12000 14000 16000 (315) (630) (177 (196 (236 (275 (354 (393 (472 (551 L(min)
  • Page 9 3500 4000 4500 5000 6000 7000 8000 9000 10000 12000 (315) (137 (157 (177 (196 (236 (275 (354 (393 (472 2625 3000 3375 3750 4500 5250 6000 6750 7500 9000 (103 (118 (132 (147 (177 (206 (236 (265 (295 (354 mm: L (min) = (W –...
  • Page 10 When projecting a 2880-pixel (aspect ratio 4:3) image at the maximum horizontal picture element Unit: mm (inches) 3500 4000 4500 5000 6000 7000 8000 (315) (137 (157 (177 (196 (236 (275 L(min) 18759 21404 24050 26695 31986 37277 42568 (1051) (1676) (738 (842...

  • Page 11: Before Installation

    Vertical positioning (side view) Before Installation Adjustable range with lens shift feature Center of lens Screen Necessary clearance for installation and maintenance For maintenance service and to prevent internal heat build- up, be sure to provide enough room around the projector when it is installed.

  • Page 12: Installing Lamp Houses

    Installing Lamp Houses Attaching the Lens The lamps for the light source of the projector are not Attach one of the optional lenses to the projector according installed in the factory. to your purpose. Depending on the model, install the optional lamp houses The procedure below describes how to attach the following into the projector.
  • Page 13 • The lens scratches easily, so when handling it, always place it gently on a stable and level surface in a horizontal position. • Avoid touching the lens surface. Connect the connectors for power focus and zoom on the lens to those on the projector. The “FOCUS”...

  • Page 14: Using The Optional Input Board

    Connectors on the LKRI-003 Using the Optional Input Board Prepare the optional input boards mentioned below depending on your system requirements, and attach them LINK A LINK B to the input board attachment part on the left side of the projector.

  • Page 15: Attaching The Exhaust Duct Adaptor

    Tighten the two screws firmly with a torque of 0.8±0.1 Attaching the Exhaust · Duct Adaptor Attach the optional exhaust duct adaptor according to the O U T installation situation. • LKRA-001 8-inch exhaust duct adaptor For details on attaching the exhaust duct adaptor, refer to To remove the input board, loosen the screws fully and the Installation Instructions supplied with LKRA-001.

  • Page 16: Connecting The Projector

    When pulling out a cable, be sure to pull it out from the plug, not the cable itself. INTER LOCK ETHERNET RS232C • When installing the optional input board, consult your Sony dealer. DVI-D connector AUX connector Refer also to the instruction manuals of the equipment to be connected.

  • Page 17: Connecting With A Computer Equipped With An Analog Rgb Connector

    Connecting with a Computer Connecting with HD-SDI Equipment Equipped with an Analog RGB Attach the optional LKRI-002 HD-SDI (4:2:2) or LKRI- Connector 003 HD-SDI (4:4:4) input board to the input board attachment part, and connect the HDCAM recorder/player. Attach the optional LKRI-001 analog input board to the The illustration below shows an example with the LKRI- input board attachment part on the projector, and connect 002 attached on INPUT B.

  • Page 18: Connecting With Component/Video Gbr Equipment

    Connecting with Component/Video Connecting the AC Power GBR Equipment Cord Attach the optional LKRI-001 analog input board to the input board attachment part on the projector, and connect Use an AC power cord that supports 8AWG, 250 V, 40 A with a DVD recorder/player or analog video equipment or higher.

  • Page 19: Installing The Srx Controller

    Fix the AC power cord securely with the cable clamp Installing the SRX and the two screws removed in step 2. Controller Replace the terminal cover using the two screws removed in step 1. Install the supplied SRX Controller on the computer used for controlling.

  • Page 20: Setting The Projector

    Owner Information Setting the Projector The Owner Information window is used to set information on this projector. Start the SRX Controller. Display the Control Function Menu window, open the SETTING window, and set the functions of the projector. For details on the Control Function Menu window, see page 24.

  • Page 21: Network

    Date & Time Mail Report Clicking on the date text box displays a calendar. Set the current date using the calendar. The Mail Report window is used to set sending e-mail to To set the current time, click the hour or minute in the time report the used time of the projection lamps or the text box and set it by clicking operating hours of the projector for maintenance to the...

  • Page 22: Pc Communication

    SMTP Authentication: Selects when “SMTP Network Block Reboot Authentication” is necessary when e-mail is sent. Restarts the Network CPU after the PC Communication Account Name: Enter the user name to log in to settings complete. Click the “REBOOT” button to restart. the SMTP server.

  • Page 23: Profile

    “Cancel” button: Click to cancel the change of attributes. Trap Destinations: Enter the IP address of a host for trap destination. : Register the entered IP address in the list. : Deletes the registered IP address from the list. List box: Displays the registered IP addresses of the hosts for trap destination.

  • Page 24: Chapter 3 Adjustments And Settings Using The Srx Controller

    Adjustments and Settings Using the SRX Controller Chapter For details on each setting window, see the relevant Displaying the Control window pages. Function Menu Window To clear the Control Function Menu window Select “Quit” from the “File” menu on the menu bar, or When you install the supplied SRX Controller in a click the (close) button.

  • Page 25: Picture Control Window

    Limited”, which is compatible with DVI1.0 standard and the signal level is Limited Range compliance. When the 10-bit signal based on Sony’s unique specification is input, select “10bit Twin Full” or “10bit Single Full” for a signal of Full Range...

  • Page 26: Signal Info (Information)

    compliance, or “10bit Twin Limited” or “10bit Single Clicking the “RESET” button resets the following four Limited” for a signal of Limited Range compliance. settings to the factory preset values. When the LKRI-001 is installed Contrast: Adjusts the picture contrast. The higher the Select “YPbPr”...

  • Page 27: Color/Frame Window

    Adobe RGB: Select when projecting Adobe RGB COLOR/FRAME Window compatible computer signals. CUSTOM: Select when projecting a signal using the color gamut defined by the user. The default value is the same as DCDM. The COLOR/FRAME window is used to adjust the input Color Temp (temperature): Selects the color signal.

  • Page 28: Frame Adjust

    6500K: White (0.3127, 0.3290) INSTALLATION Window 9300K: White (0.2840, 0.2970) DCI W/P: White (0.3140, 0.3510) CUSTOM1 to CUSTOM3: White (0.3127, 0.3290) (default values) The INSTALLATION window is used to adjust the Gamma settings projected picture and to change the lamp output, etc. 2.6: 2.6 2.2: 2.2 CUSTOM: Value set using CUSTOM...

  • Page 29: Sircs

    • 720p, 1920 × 1080 or 2048 × 1080 signal with a 16:9 SIRCS aspect ratio: Stretched to a 2.39:1 aspect ratio. When you click the “Off” radio button, the input signal is Sets to enable or disable operations using the remote displayed without converting the aspect ratio.

  • Page 30: Test Pattern

    The SERVICE window is used for adjustment by your Click the radio button of the desired test pattern from Sony dealer. among “Cross Hatch”, “Cross Hatch (Invert)” and “Checker Flag”. When you do not display a built-in test pattern, click the “Off”...

  • Page 31: Registration Adjust

    REGISTRATION ADJUST COLOR SPACE CONVERTER A red and blue picture element can be moved for The color characteristics of the projector can be corrected registration up to two picture elements vertically and for each color gamut, “sRGB(709)”, “DCDM” or “Adobe horizontally.

  • Page 32: Correcting The Color Characteristics (Color Space Converter)

    Output 80% red, 80% green and 80% blue signals Correcting the Color again and measure the values of x and y in the center of the screen. Characteristics (Color Check that the difference between the measured value Space Converter) and the value for “Target Color Gamut” is within the range as shown below.
  • Page 33 Click the “CALC” button. Select “Gray10”, “Red1”, “Green1” and “Blue1” in “Test Pattern Select” again and measure the values for x and y in the center of the screen. Check that the difference between the measured value and the value for “Target Color Gamut” is within ±0.005.

  • Page 34: Input Signals And Adjustable/Setting Items

    Input Signals And Adjustable/Setting Items Some items of “Signal Adjust” in the PICTURE CONTROL window and “Frame Adjust” in the COLOR/FRAME window are not adjusted or set depending on the input signals. Items that cannot be adjusted depending on the input signal are not displayed in the window.

  • Page 35: Chapter 4 Others

    The percentage indicates the time used before the recommended time for replacement. Use them as a guide. Be sure to ask your Sony dealer to replace the projection lamp and lamp house. Note Replacement of the lamp by unqualified service personnel may result in explosion or fire.

  • Page 36: Error Messages

    Error Messages The error messages are displayed in the STATUS MESSAGE window on the left side of projector and the Error display window of the SRX Controller. If there are two or more messages, a displayed message changes each five seconds. Error messages Meaning Remedy...
  • Page 37 Error messages Meaning Remedy LAMP_B HOUSE DETACHED The projection lamp house of Lamp B is Check the attachment screw on the projection detached, or the harness is disconnected lamp house of Lamp B or the harness. or down. REAR COVER DETACHED The rear cover is open, or the harness is Close the rear cover securely.

  • Page 38: Dimensions

    Dimensions External Dimensions Front 740 (29 357 (14 383 (15 30 (1 Center of lens 194 (7 201 (8) Center of gravity 275 (10 294 (11 Unit: mm (inches) Side 102 (4 1224 (48 548 (21 Center of lens 108 (4 Center of gravity 6-M6, depth 7 mm or less (For fixing the main body)

  • Page 39: Mounting Platform Dimensions

    552 (21 552 (21 Unit: mm (inches) Mounting Platform Dimensions Indicates the dimensions of the recommended shape for the projector attachment parts. Material Mounting platform: SECC, 3.2 mm ( inch) thickness Bolt: SWCH M6 × 12 mm ( inch) (for the mounting platform with 3.2 mm ( inch) thickness) Notes •...
  • Page 40 964 (38) Screw hole (M6) for fixing the main body 6-ø8 holes 4-R7.5 36.3 116.3 847.7 927.7 964 (38) 912 (36) 482 (19) 12-ø13 holes 927.7 847.7 116.3 36.3 4-R7.5 Screw hole (M6) for fixing the main body 6-ø8 holes 964 (38) Unit: mm (inches) Dimensions...

  • Page 41: Necessary Clearance For Installation And Maintenance

    Necessary Clearance for Installation and Maintenance Dangerous area in case of lamp explosion 2000 1000 1000 1000 ( 39 Unit: mm (inches) 1000 (39 1000 (39 Exhaust Exhaust area Dangerous area in case of lamp explosion Unit: mm (inches) Dimensions...

  • Page 42: Displayed Image Size In Multiple Screen Mode

    Displayed Image Size in Multiple Screen Mode Unit: pixel Screen Single screen Dual screen Quad screen mode Horizontal Vertical size Horizontal Vertical size Horizontal Vertical size Type size size size of signal VIDEO60 2880 2156 2003 1499 1440 1078 VIDEO50 2880 2146 2003...

  • Page 43: Index

    fV 26 Profile 23 Index Program Launcher screen 24 PROGRESSIVE DISPLAY MODE 29 Gamma 27 Projection Distance Charts 7 Projection lens 12 About the Display Mode 6 Projector 20 Adjustments and Settings Using the Projector Identifying 22 H Shift 28 SRX Controller 24 H Size 28 Attaching the Lens 12...
  • Page 44 Sony Corporation...

This manual is also suitable for:

Srx-t110

Table of Contents