Chapter 4 Others; Lamp Life - Sony SRX-T105 Installation Manual

Others

Lamp Life

Recommended time for replacement of the projection
lamp is as follows:
SRX-T110: Approx. 800 hours
SRX-T105: Approx. 1,000 hours
The "Lamp A" and "Lamp B" bar indicators in the Control
Function Menu window become red when the time for
replacement is coming near. The percentage indicates the
time used before the recommended time for replacement.
Use them as a guide.
Be sure to ask your Sony dealer to replace the projection
lamp and lamp house.
Note
Replacement of the lamp by unqualified service personnel
may result in explosion or fire.
Continuously lighting the lamp will reduce its lamp life.
Be sure to off the lamp for one to two hours after
continuously lighting for 24 hours.
To replace the lamp
When replacing the lamp, use the optional projection lamp
for replacement.
LKRX-110 projection lamp for SRX-T110
LKRX-105 projection lamp for SRX-T105
Use of any lamps other than the above may cause damage
of the projector.
Contact your Sony dealer for replacement of the lamp.
Caution
The lamp and lamp house remain at a high temperature
after the projector is turned off. If you touch the lamp, you
may burn your finger. When you replace the lamp, wait for
at least an hour for the lamp to cool.
4
Chapter
35
Lamp Life