Network; Mail Report; Time Server(Ntp Server); Report Timing - Sony SRX-T105 Installation Manual

Date & Time
Clicking on the date text box displays a calendar. Set
the current date using the calendar.
To set the current time, click the hour or minute in the time
text box and set it by clicking

Time Server(NTP Server)

Enter the IP address of the NTP server.

Network

The Network window is used to configure the network
setting for the projector.

Internet Protocol (TCP/IP)

Sets the IP address of the projector.
Click either radio button.
Obtain an IP address automatically (DHCP): Click
when you obtain an IP address automatically from a
DHCP server.
Specify an IP address: Click when you specify a fixed IP
address. Sets the following items.
IP Address: Enter the IP address of the projector.
Subnet Mask: Enter the subnet mask.
Default Gateway: Enter the default gateway.
Primary DNS: Enter the IP address of a primary
DNS server.
Secondary DNS: Enter the IP address of a secondary
DNS server.
LAN
MAC address: Displays the MAC address of the
projector.
Speed: Sets the link speed of Ethernet. Select from the
drop-down list displayed by clicking
.
.

Mail Report

The Mail Report window is used to set sending e-mail to
report the used time of the projection lamps or the
operating hours of the projector for maintenance to the
preset addresses.

Report Timing

Lamp Timer Reminder: Presets the timing when e-mail
is sent for reporting the used time of the lamps.
Maintenance Reminder: Presets the timing when e-mail
is sent for reporting the elapsed operating time of the
projector for maintenance.
Re-count: Resets the elapsed operating time when you
check the check box.

Reporting Sources/Destination

FROM: Enter the e-mail address from which e-mails are
sent.
Email Address: Enter the e-mail addresses to which you
send e-mails as TO and CC.
Reporting Contents
Error: Check the addresses to which you want to send e-
mail for reporting errors.
Lamp Timer/Maintenance: Check the addresses to
which you want to send e-mail for reporting "Lamp
Timer" and "Maintenance".

Mail Server

Outgoing Mail Server (SMTP): Enter the SMTP
(sending mail) server name or the IP address of the
SMTP server.
Requires Authentication: If authentication is required
when you send e-mails, check the check box and
select either way for authentication.
POP before SMTP: Selects when "POP before
SMTP" is necessary when e-mail is sent.
POP3 Server: Enter the POP3 server name or the
IP address of the POP3 server.
Account Name: Enter the user name to log in to
the POP3 server.
Password: Enter the password of the user to log in
to the POP3 server.
21
Setting the Projector