Fujitsu fi-4340C Operator's Manual page 44

"
Set the guides so that there is a small
clearance between the document edges and
the guides. Load the document face down on
the ADF paper chute and adjust the guides
to the document width.
NOTICE
• Squeeze the guide lever to free the guides.
• Do not load document stacks thicker than 8 mm.
• Set the guides so that they touch the document sides.
#
After the read command is issued from the host system and the documents are read, scanned
documents are expelled into the stacker for removal.
G 4-8
Document
Guide leber
(Both sides)
Guide