Fujitsu fi-4340C Operator's Manual page 77

12 Select Interface
1. Press "Next" or "Previous"
Screen 29
NOTICE
The Screen 29 will appear oniy when the scanner has proper interface boards or option boards in the
third party slot.
2. At Screen 29, press
setting.
NOTICE
1.Normally, this setting does not have to be changed.
2.When an appropriate board is installed in the third party slot of the scanner, the scanner
automatically turns off the SCSI interface, activating the board in the third party slot. Screen 54 can
be used to forcibly change the selected interface. The selected interface is then forcibly changed.
3.The SCSI interface and the board installed in the third party slot cannot be used at the same time.
4.The default is Auto.
3. Press to return.
13 Display the TPS Board ID Number
1. Press "Next" or "Previous"
Screen 30
The scanner displays the ID number if the applicable board is installed.
NOTICE
If the Fujitsu video Interface Option board is installed properly, the display shows "ID=7".
2. Press to return.
and let the scanner display Screen 29.
or to select the interface type. Press
and let the scanner display Screen 30.
if you want to change the
G 7-13