Back to Contents Page
Fan
Dell™ Vostro™ 1510
Service Manual
Removing the Fan
Replacing the Fan
Removing the Fan
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in
Before Working on Your
2. Loosen the two screws that secure the memory cover. (See
3. Slide the cover out of the compartment and set it aside.
4. Remove the three M2.5 x 5-mm screws that secure the fan to the base of the computer.
5. Disconnect the fan connector from the system board connector, and remove the fan.
1 fan
2 M2.5 x 5-mm screws (3)
3 fan connector
Replacing the Fan
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
This procedure assumes that you have completed the removal procedure
1. Align the screw holes on the fan with the holes on the base of the computer.
2. Replace the three M2.5 x 5-mm screws to secure the fan to the base of the computer.
3. Connect the fan connector to the system board connector.
4. Replace the memory cover and tighten the screws.
Back to Contents Page
Computer.
Removing a Memory Module
Removing the
Fan.
for an illustration of the memory cover.)