3. Remove the WLAN card (see
4. Remove the hinge cover (see
5. Remove the keyboard (see
6. Remove the display assembly (see
7. Remove the display bezel (see
8. Remove the display inverter (see
9. Remove the camera/microphone assembly (see
10. Remove the two M2 x 5-mm screws from the hinges.
11. Remove the display panel (see
12. Lift the display panel out of the top cover.
13. Disconnect the display cable from the connector on the back of the display panel.
1 display panel 2 display cable connector
3 display cable
Replacing the Display Cable
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
This procedure assumes that you have completed the removal procedure
1. Connect the display cable to the connector on the back of the display panel.
2. Align the guide pins at the top of the display hinge panels and position the display panel in the top cover.
3. Replace the two M2 x 5-mm screws in the hinges.
4. Replace the display inverter (see
5. Replace the display bezel (see
6. Replace the display assembly (see
7. Replace the keyboard (see
8. Replace the hinge cover (see
9. Replace the WLAN card (see
Removing a WLAN
Card).
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Display
Assembly).
Removing the Display
Bezel).
Removing the Display
Inverter).
Removing the Camera and Microphone
Removing the Display
Panel).
Replacing the Display
Inverter).
Replacing the Display
Bezel).
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing a WLAN
Card).
Assembly).
Removing the Display
Cable.