10. Replace the hard drive cover. See
Camera and Microphone Assembly
Removing the Camera and Microphone Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in
Before Working on Your
2. Remove the hard drive cover. See
3. Remove the WLAN card (see
4. Remove the hinge cover (see
5. Remove the keyboard (see
6. Remove the display assembly (see
7. Remove the display bezel (see
8. Remove the M2 x 3-mm screw that secures the camera/microphone assembly.
9. Lift the camera/microphone out of the top cover and disconnect the camera/microphone cable.
1 M2 x 3-mm screw (1)
Replacing the Camera and Microphone Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
This procedure assumes that you have completed the removal procedure
1. Connect the camera/microphone cable to the connector on the camera/microphone assembly.
2. Position the camera/microphone in the top cover and replace the M2 x 3- mm screw that secures the camera/microphone assembly to the top cover.
3. Replace the display bezel (see
4. Replace the display assembly (see
Removing the Hard Drive
for an illustration of the hard drive cover.
Computer.
Removing the Hard Drive
for an illustration of the hard drive cover.
Removing a WLAN
Card).
Removing the Hinge
Cover).
Removing the
Keyboard).
Removing the Display
Assembly).
Removing the Display
Bezel).
Replacing the Display
Bezel).
Replacing the Display
Assembly).
Removing the Camera and Microphone
Assembly.