10. Replace the center control cover (see
Camera and Microphone Assembly
Removing the Camera and Microphone Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in
Before You
2. Remove the center control cover (see
3. Remove the keyboard (see
4. Remove the display assembly (see
5. Remove the display bezel (see
6. Remove the display panel (see
7. Disconnect the camera cable connector from the camera and microphone asssembly.
8. Lift the camera and microphone assembly out of the display cover.
1 camera cable connector 2 camera/microphone assembly
Replacing the Camera and Microphone Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in
Before You
2. Place the camera/microphone assembly on the display cover.
3. Connect the camera cable connector to the camera/microphone assembly.
Back to Contents Page
Replacing the Center Control
Begin.
Removing the Center Control
Removing the
Keyboard).
Removing the Display
Assembly).
Removing the Display
Bezel).
Removing the Display
Panel).
Begin.
Cover).
Cover).