Removing The Internal Card With Bluetooth® Wireless Technology - Dell 1525 - Inspiron - Pentium Dual Core 1.86 GHz Service Manual

Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
Dell™ Inspiron™ 1525/1526 Service Manual
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
Removing the Internal Card With Bluetooth® Wireless Technology
1. Follow the procedures in Before You
2. Remove the center control cover (see
3. Remove the screw securing the card.
4. Grasp the connector end of the card and slide it out from under the securing tabs.
5. Disconnect the cable from the card.
1 card 2 securing screw
Replacing the Internal Card With Bluetooth® Wireless Technology
1. Connect the cable to the card.
2. Slide the card at an angle into the card compartment and replace the securing screw.
3. Replace the center control cover (see
Back to Contents Page
Begin.
Removing the Center Control Cover).
Replacing the Center Control Cover).