Back to Contents Page
Processor Thermal-Cooling Assembly
Dell™ Inspiron™ 1525/1526 Service Manual
Removing the Processor Thermal-Cooling Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
1. Follow the instructions in
Before You
2. Turn the computer over.
3. Remove the eight captive screws securing the back cover and remove the module cover.
1
module cover
4. In sequential order, loosen the five captive screws securing the processor thermal-cooling assembly to the system board, then carefully lift the
processor thermal-cooling assembly out of the computer.
1 captive screws (5) 2 processor thermal-cooling assembly
Replacing the Processor Thermal-Cooling Assembly
Begin.
2
captive screws (8)