Perc 3/Dcl Card Layout; Installation Steps; Figure 9-2. Perc 3/Dcl Card Layout - Dell PowerEdge Expandable RAID Controller 3 User Manual

J2
J3
J7 Channel 0
External
Ultra-High
Density
68-pin SCSI
Connector
J15 Channel 1
External
Ultra-High
J16
Density
J18
68-pin SCSI
J19
Connector
J16 Channel 0 Terminator Power Enable
J18 Channel 1 Power Enable
J19
120
PERC 3/ DC o r PERC 3/ D CL Har dwa r e I n st a lla t io n

PERC 3/DCL Card Layout

F i g u r e 9 - 2 . P E R C 3 / D C L C a r d L a y o u t
J4 Channel 0 Internal J5 Channel 1 Internal
High-Density 68-pin High-Density 68-pin
SCSI Connector

Installation Steps

The steps for installing the RAID controller are shown below. See the
following pages for more information about each step.
Unpack the PERC 3/DC or PERC 3/DCL.
1
Power off the host system.
2
Set jumpers.
3
Set SCSI termination.
4
Install the PERC 3/DC or PERC 3/DCL controller.
5
Select and set target IDs for SCSI devices.
6
SCSI Connector
J8 Serial EPROM
J9 Onboard BIOS Enable
J10 NVRAM Clear
J11 Serial Port Connector
J11
J9
J8
J10
J13
J14
J17
J13 Dirty Cache
J14 SCSI Activity
J17 I2C