Kenmore 721.33189 Owner's Manual page 13

TO REMOVE BAG
WARNING
Always unplug power cord from
electrical outlet before performing
any service on vacuum.
Pull the dust cover /"1
grip forward.
Remove cover and _7 ._
lay aside. __/'_
Dust_
Cover _..
Grasp the dust bag
collar and pull
gently, carefully
removing the dust
bag.
Throw away the
used dust bag.
Do not reuse.
Bag
CAUTION
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet
freshener, face powder, fine dust,
plaster, soot, etc. can clog the bag
and cause it to burst before it is full.
Change bag more often when
vacuuming these materials.
Bag
Holder
Bag --
Cavity
Motor--
Safety !
Filter_,_/d
Check the bag
holder and the
motor safety filter.
If either is blocked,
clean them. See
MOTOR SAFETY
FILTER
CLEANING.
TO REPLACE BAG
Unfold the new dust bag.
Insert the dust bag
onto the bag holder
completely by
holding the bag
collar as shown and
snapping it into
position.
Be sure bottom of dust bag is completely within
dust bag cavity prior to replacing the dust
cover.
Position the dust Cover
cover so its
positioning tab fits
into the slot on the
vacuum body base.
Dust -
Cover
Close the dust
_) cover.
You will hear a
distinct snap when
cover is securely
closed.
-13-