NEC Express 5800 User Manual page 47

To install the rack frame link kit:
1. Position the two rack cabinets next to each other as shown in Figure 4-7.
Ensure the front of each rack is facing in the same direction.
2. Position a link angle bracket in the upper front corner of the left cabinet and
secure it to the cabinet with two Phillips-head screws. See Figure 4-7.
3. Secure the remaining three link angle brackets to the other three corners of
the left cabinet in the same manner.
4. Move the right cabinet adjacent to the left cabinet so that the link angle
brackets secured to the left cabinet protrude into the corners of the right
cabinet.
5. Secure the cabinets together with the Phillips-head screws supplied.
Front
Figure 4-7. Rack Frame Link Kit Installation
Front
Installing the System Rack 4-9