NEC Express5800 320La System Configuration Manual page 28

[Status(Raid)]]
----------------------------------------------------------------------------------
name
md0
md1
md2
md3
md4
md5
md6
md7
md8
md9
----------------------------------------------------------------------------------
Command action
1 Status(Raid)
2 Status(All Disks)
3 Repair Disk
4 New Disks
5 Remove Half Disk
6 Remove Full Disks
9 <= RETURN
The following is an example of restoring (repairing) RAID (Step 3 of this
procedure).
Command action
1 Status(Raid)
2 Status(All Disks)
3 Repair Disk
4 New Disks
5 Remove Half Disk
6 Remove Full Disks
9 <= RETURN
Command: 3
[Repair Disk]
* Which SCSI SLOT? [1-6] 3
mdctl: hot added /dev/sdc6
mdctl: hot added /dev/sdc1
mdctl: hot added /dev/sdc5
Command action
1 Status(Raid)
2 Status(All Disks)
3 Repair Disk
4 New Disks
5 Remove Half Disk
6 Remove Full Disks
9 <= RETURN
Command: 1
2-20 Configuring Linux
partition label status
/boot /boot DUPLEX
/usr /usr DUPLEX
/home /home DUPLEX
/var /var DUPLEX
/ / DUPLEX
/tmp /tmp DUPLEX
/swap DUPLEX
extra_s1 SIMPLEX
extra_s5 SIMPLEX
extra_s6 SIMPLEX
member
(1)sda1 (4)sdd1
(1)sda5 (4)sdd5
(1)sda10 (4)sdd10
(1)sda6 (4)sdd6
(1)sda8 (4)sdd8
(1)sda9 (4)sdd9
(1)sda7 (4)sdd7
(3)sdc1 (6)sdf1
(3)sdc5 (6)sdf5
(3)sdc6 (6)sdf6