Action After Timeout –
None- No action is taken.
Hard Reset – The system is rebooted.
Power Cycle – The system is powered OFF, then immediately powered ON
to clear an abnormal condition (Ex: hung operating system).
Power Down (default) – The system is shutdown completely and powered
off.
Shutdown Properties
Shutdown Properties when enabled allows the Agent to monitor operating
system shutdown for errors.
Timeout – The maximum amount of time the operating system should take to
complete a shutdown.
Action When Timeout – When a the operating system takes longer to
shutdown than the allotted time specified, the Action When Timeout setting
determines how the Agent responds.
None - No action is taken.
NMI/NMI (default) – An error is generated to indicate the operating system
took longer than the allotted time to shutdown. This could indicate that the
operating system is hung.
Action after Timeout
None- No action is taken.
Hard Reset – The system is rebooted.
Power Cycle – The system is powered OFF, then immediately powered ON
to clear an abnormal condition (Ex: hung operating system).
Power Down (default) – The system is shutdown completely and powered
OFF.
ESMPRO Agent for Linux 3-23