Agent Monitoring - NEC Express5800 320La System Configuration Manual

!
Shutdown – The system is systematically shut down.
!
Reboot - The system is rebooted.
Destination ID List: Highlight the method of reporting to be used should this
selected event occur. Then tab to Add and press ENTER to add the selected
method to the Report to: list.
Report to: Lists the active method of reporting an event.

Agent Monitoring

Selecting ESMagntconf at the ESMPRO/ServerAgent menu displays the Agent
Properties menu. Here you can establish threshold limits and reset values for a
number of parameters monitored by the Agent. Agent Properties are described
in detail later in this chapter. At the Agent, you can establish threshold limits
and reset values for a number of parameters. These settings can also be made
with ESMPRO Manager. However, setting monitoring intervals for these
parameters can only be done in the Agent.
1. Log in the system as a root-authorized user.
2. Move to the directory containing NEC ESMPRO Agent.
If no particular installation destination is specified, NEC ESMPRO Agent is
installed in "/opt/nec/esmpro_sa."
The procedure here is explained with NEC ESMPRO Agent installed in
"/opt/nec/esmpro_sa."
3. Move to the directory containing Control Panel.
4. Start Control Panel.
The Control Panel window appears.
3-14 ESMPRO Agent for Linux
cd /opt/nec/esmpro_sa
cd bin
./ESMagntconf