Forced Shutdown - NEC BladeServer Express5800 Series User Manual

FORCED SHUTDOWN

Use this function when an OS command does not shut down the CPU blade, the POWER switch
does not turn off the CPU blade, or resetting does not work.
Press and hold the POWER switch on the CPU blade for at least four seconds. The power is forcibly
turned off. To turn on the power again, wait approximately 10 seconds after turning off the power.
IMPORTANT:
power once to load the OS, and turn off the power again in the normal
way.
If the remote power-on function is used, cycle the
Troubleshooting 8-31
POWER switch