NEC BladeServer Express5800 Series User Manual page 220

BIOS/FW Updating
This menu allows you to update the BIOS and firmware of the server by using an update
disk (3.5-inch floppy disk) that is distributed by a NEC customer service representative.
After rebooting the system, an update program is started automatically from the floppy
disk, and the various BIOS and firmware programs are updated.
IMPORTANT:
running. If the update process is cancelled, the system may not be able
to start.
ROM-DOS startup FD
Creates a support disk for starting the ROM-DOS system.
Test and diagnostics
Execute various tests on the server to check if the server functions are normal and if the
connection between the server and an additional optional board is normal.
After the diagnostics are executed, a system check program assigned to each model starts.
See Chapter 7 for details.
System Management
The parameters of BMC (Baseboard Management Controller) are set for remote control
and alert.
This menu's function is the same as the "System Management" of the "Maintenance
Utility."
Do not turn off the server while the update program is
Troubleshooting 8-27