NEC BladeServer Express5800 Series User Manual page 191

7-4 Maintenance
6.
Select [Test and diagnostics].
Select [End-User Mode]. The system diagnostics start. The system diagnostics take
approximately three minutes to complete. When they are complete, the screen displays the
following:
Diagnostics tool title
TeDoLi (TEst & Diagnosis On Linux) Ver001.00 (Build020901.1.1m)
Start 10:06:58 End 10:09:58 Pass 000:03:00 TestTime 000:03:00
Test End : NormalEnd 03 AbnormalEnd 00 ForceEnd 00
[Enter] Detail Information [ESC] Return to Enduser Menu
Guide line
– Diagnostics tool title
Displays the name and version of the diagnostic tool.
– Test window title
Displays the progress of the system diagnostics. "Test End" is displayed when the
system diagnostics complete.
– Test result
Displays the start, end, and elapsed time and completion status of the system
diagnostics.
– Guide line
Displays the functions of the keys to operate the system diagnostics.
– Test summary window
Displays the results of each test executed. Move the cursor and press the Enter key
to display the details of the test.
When an error is detected by the system diagnostics, a test result in the test summary
window is highlighted in red and "Abnormal End" is displayed on the right side.
Move the cursor to the test that detected the error and press the Enter key. Record the
error message and contact your service representative.
<System>
MEM Memory
CACHE Cache
<SCSI>
HDD_02:000 DK32DJ-36W
Test End
16 count NormalEnd
49 count NormalEnd
89 count NormalEnd
Test window title
Test result
Test summary window