NEC BladeServer Express5800 Series User Manual page 153

5-16 Installing the Operating System with Express Setup
15.
Express Setup will start when you click [Perform] in the [Start Express setup] step.
16.
Copy optional Mass Storage Driver.
If you need to install an optional mass storage driver, a message will appear.
Insert the CD-ROM or floppy disk containing the mass storage driver and proceed
according to the messages.
17.
Remove the NEC EXPRESSBUILDER DVD from the optical disc drive according to the
message.
If you proceed with setup by using a parameters file, remove the floppy disk from the
floppy disk drive.
Insert the Windows Server 2003 CD-ROM into the optical disc drive.
The [Agree Software License Agreement] screen appears.
18.
Read the contents carefully and click [Yes] if you agree. If you do not agree, click [No].
IMPORTANT:
If you do not agree to this license, setup terminates and Windows
Server 2003 will not be installed.
If the "NetWare Gateway (and Client) Service" is specified to
install, a window to specify settings for the "NetWare Gateway
(and Client) Service" pops up on the first logon. Specify the
appropriate values.