5-24 Installing the Operating System with Express Setup
SETTING FOR SOLVING PROBLEMS
Configure the following settings in advance to ensure quick recovery from system failures.
Memory Dump (Debug Information)
This section describes the procedures for collecting memory dump (debug information) on the
server.
IMPORTANT: Cautions for the Memory Dump
The maintenance personnel designated by your sales agent are
responsible for collecting the memory dump. Customers should
only configure settings of the memory dump.
Sometimes a message indicating a shortage of virtual memory
appears at system startup. When a failure has occurred after
configuring the settings described here and you have restarted the
system to save the memory dump, continue the startup. If you
restart the system, you may not be able to collect the memory
dump accurately.
Follow the procedure below to configure the memory dump:
1.
Click [Start], click [Control Panel], and then open [System].
The [System Properties] dialog box appears.
2.
Select the [Advanced] tab.
3.
Click [Settings] in the [Startup and Recovery] box.