NEC BladeServer Express5800 Series User Manual page 80

Console Redirection
Select "Console Redirection" on the Server menu to display the following screen:
See the table below for the options and their descriptions:
Option
BIOS Redirection
Port
ACPI Redirection
Port
Baud Rate
Flow Control
Terminal Type
Remote Console
Reset
Parameter
[Disabled]
Serial Port B
[Disabled]
Serial Port B
9600
[19.2k]
57.6k
115.2k
None
XON/XOFF
[CTS/RTS]
CTS/RTS+CD
PC ANSI
[VT100+]
VT-UTF8
[Disabled]
Enabled
Description
Specify the serial port to which a
hardware console is connected.
Specify the serial port to which an
ACPI console is connected while the
operating system is running.
Specify the baud rate used for the
interface with hardware consoles.
Specify the flow control method.
Specify the type of remote console.
Specify whether reset from the remote
console is enabled or disabled.
Configuring Your Server 4-23
Your Setting
[ ]: Factory-set