NEC BladeServer Express5800 Series User Manual page 237

Adding Order and Precautions
The DIMM's must be populated in pairs.
The DIMM's in a pair must have the same capacity and speed. Check the labels on the
DIMM's.
Install pairs of DIMM's into slots as follows:
– DIMM (first pair): Slots #1 and #2
– DIMM (second pair): Slots #3 and #4
– DIMM (third pair): Slots #5 and #6
– DIMM (fourth pair): Slots #7 and #8
– DIMM (fifth pair): Slots #9 and #10
– DIMM (sixth pair): Slots #11 and #12
Installation
Install DIMM's in the CPU blade in the following procedure:
1.
Shutdown the CPU blade and turn off the power.
2.
Remove the CPU blade from the Blade Enclosure.
Refer to the User's Guide of the Blade Enclosure.
3.
Place the CPU blade on an anti-static sheet.
4.
Remove the two screws securing the top cover.
Upgrading Your Server 9-13