Using the Single Automatic Document Feeding Mode (SADF Mode)
This is the mode in which you insert your originals one by one into the Duplexing Document Feeder to
make a copy. When you insert the original into the Single Document Feed Tray, the copier automatically
starts the copy cycle.
NOTES
• Originals available for the SADF Mode.
Type
: Plain paper
Thickness : 35 g/m² to 200 g/m²
Size
: A3L to A5L
• The following features will be cancelled when using the SADF Mode.
2-sided Original, 2-in-1 Original, Book, Sort Mode, Group Mode, Staple Mode, Cover Mode, Page
Insertion Mode, Number Stamping Mode, Manual Feeding, Original Direction, Margin.
Open the Single Document Feed Tray and
1
slide the Guide Plate to the size of the
original.
Make sure that the Start Key is lit green and
2
insert the original face down into the Single
Document Feed Tray.
NOTES
• Be sure to place one original at a time.
• Be sure to correct any fold or curl in the
original.
The original is automatically taken up and
3
the copy cycle is started.
Making sure that the Start Key lights up
4
green again, insert the next original.
1166O025AA
1166O026AB
2-19
5. Placing Originals