Table of Contents
Advertisement
8. Using Memory Recall
Memory Recall
After a print cycle has been completed, Memory Recall allows you to run another print cycle again using
the same image data and copy settings as the previous one without having to reload the originals.
After the first print cycle, touch
to make the necessary settings.
Selecting Memory Recall
Memory Recall
Touch
1
To change the number of copies to be made,
2
enter the new number using the 10-key Pad.
Useful Tip
If you have entered an incorrect number, press
the
key, then enter the correct number.
C
Memory Recall
on the Touch Panel to show a screen that allows you
.
3
NOTES
• Memory Recall, available from User's Choice,
• This function cannot be used in the Interrupt
• The preceding image data and copy settings
1168P177CD
Useful Tip
After you have made copies from a confidential
document, it is recommended that you press the
1168P178DB
Panel Reset key to erase the data.
Press the Start key and the copier starts the
print cycle.
must be turned ON to use this function.
p. 4-5
mode.
are cleared to disable Memory Recall when
any of the following operations are
performed:
• The copier is turned OFF.
• The copier scans a new original or the
Start key is pressed.
• The Access key, Interrupt key, Utility key
or Panel Reset key is pressed.
• The Clear key or Panel Reset key is
pressed while the copier remains idle.
3-53
Advertisement
Table of Contents
