Table of Contents
Advertisement
Manual Bypass Copying
• Use the Manual Bypass to make copies on paper not loaded in any drawer, or to copy onto OHP
transparencies, thick paper, or any other special paper.
• When using the Manual Bypass Tray, you can load only one sheet of copy paper at a time.
Copy Paper that Can be Used for Manual Bypass Tray
Types of Paper
• Plain paper (weighing 60g/m
• Thick paper (weighing 91g/m
• OHP transparencies, Labels
Paper Size
• Max. Size: 297mm 432mm
• Minimum Size: 90mm 140mm
Using the Manual Bypass Tray
Place the original on the Original Glass and
1
make the control panel settings.
Open the Manual Bypass Tray.
2
2
2
to 90g/m
)
2
2
to 157g/m
)
3
1166O193AA
NOTES
• Correct any curl if you are using thick paper.
• For making copies on thick paper, OHP
transparencies or labels, the following
functions cannot be used: 2-sided Copying,
2in1, 4in1, Book, Booklet Creation, Sort,
Group, Staple, Hole Punch, Page Insertion,
Cover, OHP Interleaving, Distribution,
Separate Scan.
• The paper will be copied on the side facing
down.
Slide the Paper Guides to the size of the copy
paper and insert a sheet of paper.
p. 7-10
3-7
2. Selecting the Paper
1166O032AB
Advertisement
Table of Contents
