Table of Contents
Advertisement
Making Copies from A Book Using
Book Copy Mode
<"Book" refers to an open bound original>
1
Place the open book so that its top edge is at
the rear of the copier and the center of the
book is aligned with the Book Marker
indicated on the Original Length Scale.
Original Length Scale
Gently lower the Document Feeder or
2
Original Cover.
NOTES
• If the book is thick, make a copy with the
Document Feeder or Original Cover raised.
• Do not look directly at the Original Glass
surface as a strong beam of light is emitted.
• Not positioning the open book properly will
result in copies with pages in incorrect order.
• Start copying with the lower-numbered pair of
pages.
1134O037AA
Book Marker
1166O186AA
Instructions for Original Placement
• Be sure to raise the Document Feeder 15° or
more before placing the original. If the
Document Feeder is raised to an angle less
than 15°, the copier may fail to select the
correct copy paper size or zoom ratio.
• Do not place an original weighing more than
3 kg on the Glass.
• When placing an open book, do not press the
book hard on the glass, as the glass could
crack.
2-21
5. Placing Originals
15°
1166O187AA
Advertisement
Table of Contents
